Want to make a light smart that you can turn on or off from multiple switches? Don't worry, you're in the right place. In this comprehensive guide, we will find out how to install Freedompro Light Module to automate home lighting and control a light connected to diverters and switches.
First, remember that Freedompro has 3 different types of Light Module. In this short guide, we will address the installation of the Light Module Mini for recessed boxes or fruit boxes.
Ready? Let's find out right now how to install Freedompro Light Module Mini to control a light connected to more than 2 switches.
Warnings
Carefully read the warnings given below before proceeding:
The installation of the device should be done carefully by a qualified electrician.
Any changes to the wiring should be made only after ensuring that there is no voltage in the electrical system.
Install the device in a protected, dry environment and inside the building.
Do not connect devices exceeding the maximum load indicated to the module.
Install the module only on electrical grids and devices that comply with current standards.
A short circuit in the power grid or in any device connected to the module may damage it.
Connect the module only as indicated in this manual. Any other method may cause damage and void the warranty.
Install on the AC side of the device a 20 A circuit breaker with an impulse withstand voltage (Uimp) of at least 4 kV and compatible voltage rating.
The device can be connected with heat-resistant (not less than 105 °C) 18-12 AWG solid conductor wires.
Neutral fuse: Disconnect mains power before servicing.
Follow the wiring diagram shown exactly.
If the instructions in this manual are not followed correctly, malfunctions, health and life hazards, violation of laws, or voiding of legal and/or commercial warranties (if any) may occur.
Output loads must be connected to How to install the Light Mini Module with multiple switches
the same supply voltage as the device.
Where to place Freedompro Light Module
Freedompro Light Module Mini is designed and developed to be installed behind buttons and wall switches in recessed boxes. In addition, the design is designed to fit perfectly in the false pole of the 500 wiring accessories series.
How to connect the Light Module Mini
Danger of electrocution!
Caution, changes to connections should be made only and only after making sure that there is no voltage on the terminals of the device!
Place the smart device inside a flush-mounted box behind pushbuttons or switches, if possible securing it in the false pole;
Remove the terminal covers with the help of a flathead screwdriver;
Connect the cable that supplies the light you want to control to the O1 terminal;
Connect the cable that comes from the main switch (first connected to the light) to the S1 terminal;
Connect the wires (Phase and Neutral) to L and N terminals to power the module, as shown in the diagram below;
Verify that the wiring is correct;
Reapply the covers to the terminals;
Restore power to the electrical system.
Wiring diagram
Check out the wiring diagrams by clicking on this link and selecting your Freedompro Smart Module.
Legenda
Terminal |
|
O1 | Load circuit output terminal 1 |
O2* | Load circuit output terminal 2 |
S1 | Command line input terminal O1 |
S2* | Command line input terminal O2 |
L/- | Line (110-240 V AC) or negative (24 V DC) terminals |
N/+ | Neutral (110-240 V AC) or positive (24 V DC) terminal |
*Please note: O2 and S2 channels are present only in Light Mini Modules LB0602-E and LB0602-F.
How to control lights connected without switches
Once you get to this point, the Light module is up and running and ready to use with the physical switches you have just connected.
Complete the pairing with your favorite app
All you have to do now is to complete the pairing with the Freedompro Home app to take full advantage of the potential of the device. Follow this quick guide to find out how to pair a Freedompro device with the app.
Once you have paired the Module with Freedompro Home you can also complete the pairing with all smart home management platforms and integrate Matter services.
Or choose your favorite ecosystem and integrate your Freedompro Module:
Freedompro is not responsible for any loss or damage in the event of improper installation or improper operation of the device due to failure to follow the operating and safety instructions in this guide.