Pairing Freedompro Smart Modules with Freedompro Home app for remote smart home control is super easy. Here is a quick guide to complete the pairing process in just a few minutes.
Once you have completed the installation of the Freedompro device and the Freedompro Home app, follow the steps in this article to proceed with the pairing procedure.
Freedompro Home allows you to set up and use your new devices in minutes, and control them from your smartphone.
Are you ready? Let's start pairing the Smart Modules or Easykon Bridges with the Freedompro app to access all these functions.
How to pair Freedompro Smart Modules with Freedompro Home
Requirements:
Freedompro Home app
Freedompro Module installed
Wi-Fi 2.4 GHz network
Make sure you are connected to the Wi-Fi 2.4 GHz network without using a VPN.
Follow the steps to easily pair your Freedompro Smart Modules:
Download the Freedompro Home app;
Make sure your smartphone is connected to your home WiFi 2.4 GHz network;
Open the Freedompro Home app on your smartphone;
Accept the permissions required by the app and log in with your Freedompro account;
If you do not have an account, you can create one using Apple, Facebook or Google.
Click the “+” in the upper right corner;
Click “Add Module.”
If the Freedompro application automatically detects devices, click “Detected Modules”; otherwise, select the “Smart Matter Modules” item;
Module is new or has been reset
After selecting the item “Smart Matter Modules.”
Click “No, it is New.”
Make sure the Module is in pairing mode and the Status LED is flashing blue, as shown in the app;
Scan the QR code on the Module or on the additional label inside the box;
Follow the directions on the screen to complete the configuration;
The Module will be displayed in the home of the app.
The Freedompro device is now ready for use.
The Module is already paired with another Matter app or service.
After selecting the item “Smart Matter Modules.”:
Click “Yes, it is already paired.”
The Freedompro Home app will start automatically scanning the network to detect the Module to be paired;
Select the Module to be paired;
Scan the QR code on the Module or on the additional label inside the box;
At this point, the Module is properly paired with the Freedompro Home app and is ready to be used.
Follow the directions below to continue with Matter pairing.
To complete the pairing with Matter as well:
Select the “Pair with Matter” item;
A list of Matter services to which the Module appears to be already paired will be displayed;
Before continuing, open one of the apps in the list (e.g., Apple Homekit, Amazon Alexa etc.) and generate the 11- or 21-digit code;
Copy the 11- or 21-digit code and return to the Freedompro Home app;
Click on the “I generated the code” item;
Paste the copied 11- or 21-digit code into the other app and continue;
The Form will be displayed in the app home.
At this point, the Freedompro Smart Module is fully ready to use and also combined with Matter services.