Not sure how to make your home shutters smart? Don't worry, we've got it covered. In this comprehensive guide, we will find out how to install Freedompro Shutter Module to automate and make your home shutters smart without connecting them to buttons and/or switches.
First, remember that Freedompro has 3 different types of Shutter Module. In this short guide, we will address the installation of the Shutter Module Mini for flush-mounted boxes or wall boxes.
Ready? Let's find out right now how to install Freedompro Shutter Module Mini to control a shutter without connecting it to buttons or switches.
Warnings
Carefully read the warnings given below before proceeding:
The installation of the device should be done carefully by a qualified electrician.
Any changes to the wiring should be made only after ensuring that there is no voltage in the electrical system.
Install the device in a protected, dry environment and inside the building.
Do not connect devices exceeding the maximum load indicated to the module.
Install the module only on electrical grids and devices that comply with current standards.
A short circuit in the power grid or in any device connected to the module may damage it.
Connect the module only as indicated in this manual. Any other method may cause damage and void the warranty.
Install on the AC side of the device a 20 A circuit breaker with an impulse withstand voltage (Uimp) of at least 4 kV and compatible voltage rating.
The device can be connected with heat-resistant (not less than 105 °C) 18-12 AWG solid conductor wires.
Neutral fuse: Disconnect mains power before servicing.
Follow the wiring diagram shown exactly.
If the instructions in this manual are not followed correctly, malfunctions, health and life hazards, violation of laws, or voiding of legal and/or commercial warranties (if any) may occur.
Output loads must be connected to the same supply voltage as the device.
Where to place Freedompro Shutter Module
First, remember that Freedompro has 3 different types of Shutter Module. In this short guide, we will address the installation of the Shutter Module Mini for flush-mounted boxes or wall boxes.
Freedompro Shutter Module Mini is designed and developed to be installed behind buttons and wall switches in recessed boxes. In addition, the design is designed to fit perfectly in the false pole of the 500 wiring series.
How to connect the Shutter Module Mini
Danger of electrocution!
Caution, changes to connections should be made only and only after making sure that there is no voltage on the terminals of the device!
Place the smart device inside a flush-mounted box behind pushbuttons or switches, if possible securing it in the false pole;
Remove the terminal covers with the help of a flathead screwdriver;
Connect the wire that supplies the rise of the motor you wish to control to terminal O1; and
Connect the wire that supplies the descent of the motor you wish to control to terminal O2
Connect the wires (Phase and Neutral) to terminals L and N to power the module, as shown in the diagram below;
Verify that the wiring is correct;
Reapply the covers to the terminals;
Restore power to the electrical system.
Wiring diagram
See the wiring diagrams by clicking on this link and selecting your Freedompro Smart Module.
Legenda
Terminal |
|
O1 | Load circuit output terminal 1 (Max 5 A) |
O2 | Load circuit output terminal 2 (Max 5 A) |
O3 | Load circuit output terminal 3 (Max 5 A) |
O4 | Load circuit output terminal 4 (Max 5 A) |
S1 | Switch input terminal (O1 control) |
S2 | Switch input terminal (O2 control) |
S3 | Switch input terminal (O3 control) |
S4 | Switch input terminal (O4 control) |
SC | Common switch output terminal |
L | Under voltage terminal (110-240V AC) |
N | Neutral terminal (110-240 V AC) |
How to manage lights connected with diverters and inverters
Once you get to this point, the Shutter module is up and running and ready to use with the physical switches you have just connected.
All that's left for you to do is to complete the pairing with the Freedompro Home app to take full advantage of the potential of the Freedompro Module. Follow this brief guide to find out how to pair a Freedompro device with the app.
Complete the pairing with your favorite app
Once you have paired the Module with Freedompro Home you can also complete the pairing with all smart home management platforms and integrate Matter services.
Choose your favorite ecosystem and integrate your Freedompro Module:
Freedompro is not responsible for any loss or damage in the event of improper installation or improper operation of the device due to failure to follow the operating and safety instructions in this guide.