Freedompro Light Module Mini (LB0801-F) is a smart device to control lights in traditional electrical systems.
What is Freedompro Light Module Mini
As with all the other modules of the Freedompro home ecosystem, Light Module is a Wi-Fi connected smart relay certified by the best smart platforms for smart home control: Apple HomeKit, Google Assistant, Amazon Alexa, IFTTT, and Home Assistant.
Freedompro Light Module has 1 channel, allowing users to setup and control a 12V DC light-type accessory.
Light Module evolves and enhances the lighting system, enabling control of smart home lights with both voice commands and local or remote control via the Freedompro app or other smart apps.
In addition, through the use of smart platforms, fully customizable automations and scenarios can be configured and leveraged, adaptable to users' needs.
Built to be ready to use, installing Freedompro Light Module takes only a couple of minutes and requires no invasive masonry work or modifications to the electrical system.
Technical Specifications and Wiring Diagrams
Technical Specifications
Model | Light Module Mini (LB0801-F) |
Dimensions | Altezza: 18 mm |
Internet connection | Wi-Fi 2.4 GHz IEEE 802.11b/g/n |
Maximum absorption (W) | 0,2 W |
Power supply | 110-240 V AC , 24-48 V DC 0,1 A |
Amperage (per channel) | 10 A |
Certifications | Apple HomeKit Samsung SmartThings |
Functions | Output timing |
Wiring diagrams
See the instruction manual and wiring diagrams for this Module by visiting this link.
Installation
Technical Requirements
Freedompro Light Module Mini
Apple/Android Smartphone
2.4 GHz WiFi network
Package Contents
Freedompro Light Module Mini
Quick Start Guide
Matter code card
How to install the smart Light Module Mini device (LB0801-F)
Installation of the Light Mini module is really very simple, just follow these steps:
Before installing the Freedompro module, disconnect the power supply from the electrical system.
Place the module behind the button or switch, inside a junction box, or wherever you prefer.
Connect the accessory and control cables to the connectors as shown in the wiring diagrams.You can find them in the manual included in the package or at the beginning of this article
Connect the power supply as shown in the wiring diagrams.
Check that the wiring is correct and reconnect the power supply to the electrical system.
The status LED of the Freedompro module turns solid magenta.
After connecting the device and powering it up, the device works immediately with the physical switches connected.
Now you can set up settings and pair the Light Mini LB0602 - E module with smart home control apps. Configure the module with the Freedompro app in the next step.
Warning!
Any changes to the wiring should be made after making sure there is no voltage in the electrical system.
Install the device in a protected and dry place inside the house.
The installation of the device should be done carefully by a qualified electrician.
Do not connect devices that exceed the maximum load indicated to the device.
Use the device only with an electrical grid and with devices that comply with all applicable standards.
A short circuit in the power grid or in any device connected to the device may damage the product.
Connect the device only by the methods indicated. Any other method may cause damage and void the warranty.
Setup
Now that you have completed the physical installation of the LB0801-F Light Module Mini, you can proceed to the setup phase.
Have you always dreamed of controlling all your smart home accessories from one app? The Freedompro app offers a complete and innovative smart home experience!
Follow the steps below to complete the setup process and proceed to pair Freedompro modules with your smartphone in no time.
Download the Freedompro app;
Agree to the permissions required by the app and log in with your Freedompro account. If you do not have an account, you can create one through Apple, Facebook or Google;
Click the "+" in the upper right corner;
Follow the directions from the Freedompro app to associate the form;
Click “Done" to complete the module setup or "Add new module" if you need to pair multiple modules;
The module will be displayed on the home page of the application.
Freedompro Smart Modules are now up and running.
Freedompro devices are ready to use as soon as they are connected to the power supply. However, to best use them, it is recommended to customize the type of controls that are connected to them.
Here you can customize the settings and change the behavior of the physical controls to suit your needs.
Click here to customize the command type
Controls can be configured through the Freedompro app.
Once you have installed and set up your module you can proceed to pair it with smart platforms.
Pairing
Complete the pairing process with your favorite app:
Maintenance and Reset
Here is a summary to help you best troubleshoot maintenance issues or carry out reset of Freedompro Modules.
Status LEDs
Check the color of the status LED located on the front of the Smart Freedompro module to immediately view and understand the status of the device.
Why is the status LED on my Smart Freedompro module red? Why is it flashing? Find out in the blink of an eye!
Here is a list of the meanings of the status LED colors:
Solid blue: System ready
Flashing blue: Pairing mode
Flashing green: Identification
Solid magenta: No Wi-Fi connection
Flashing magenta: No Internet connection
Solid red: System starting up
Flashing red: Error
Fast flashing red: Factory reset
Reset
Problems with your Freedompro Module? Before you continue reading this guide, please contact our Customer Service Department. If resetting the Freedompro module is your only option, simply follow this guide to reset the device in a few moments.
In fact, as the word itself says, performing a reset on a Freedompro module means resetting the product and then restoring the factory settings.
Warning:
Reset is an irreversible operation. Once performed, it will not be possible to go back.
Are you sure you want to reset your Freedompro Module? Please follow the steps below:
Open the flush mount box in which the Freedompro module was installed;
Press and hold the "Setup" button on the back for about 10 seconds until the status LED starts flashing rapidly red;
Wait a few moments and you will be able to configure the Freedompro module again.