Freedompro Dry Contact Module Mini (SW0901-F) is a smart relay for automating dry contact or impulse devices control in traditional electrical systems.
What is Freedompro Dry Contact Module Mini
As with all Freedompro home ecosystem Modules, Dry Contact Module Mini is a Wi-Fi operating smart device certified by the best smart platforms for smart home control: Matter, Apple HomeKit, Google Assistant, Amazon Alexa, IFTTT, and Home Assistant.
Freedompro Dry Contact Module provides 1 channel, allowing users to setup and control a dry contact or impulse device powered by 12 V DC.
Dry Contact Module evolves the electrical system by making it a complete smart home, offering impulse devices control with both voice commands and local or remote control via the Freedompro Home app and all other smart apps.
Moreover, by integrating and using smart platforms, it's possible to configure and take advantage of fully customizable automations and scenarios that can be adapted to the needs of all users.
Designed to be ready-to-use, Freedompro Dry Contact Module installation takes only a handful of minutes and doesn't require invasive masonry work or changes to the electrical system.
Technical Specifications and Wiring Diagrams
Technical Specifications
Model | Dry Contact Module Mini (SW0901-F) |
Dimensions | Height: 18 mm |
Internet connection | Wi-Fi 2.4 GHz IEEE 802.11b/g/n |
Maximum absorption (W) | < 1,2 W |
Power supply | 12 V DC 0,1 A |
Amperage (per channel) | 10 A |
Certifications | Apple HomeKit Samsung SmartThings |
Functions | Output timing |
Wiring Diagrams
Check out the instruction manual and wiring diagrams for this Module by visiting this link.
Installation
Technical Requirements
Freedompro Dry Contact Module Mini
Apple/Android Smartphone
2.4 GHz WiFi network
Package Contents
Freedompro Dry Contact Module Mini
Quick Guide
Matter code sheet
How to install Dry Contact Module Mini smart device (SW0901-F)
Installation of the Dry Contact Module Mini is actually pretty easy, just follow these steps:
Before installing the Freedompro Module, disconnect the power supply from the electrical system.
Place the Module behind buttons, switches, electrical power outlets, or wherever you prefer.
Connect the accessory and control cables to the connectors as shown in the wiring diagrams.
You can find them in the manual included in the package or at the beginning of this articleConnect the power supply as shown in the wiring diagrams.
Check that the wiring is correct and reconnect the power supply to the electrical system.
The status LED of the Freedompro Module turns steady magenta.
After connecting the device and powering it up, it immediately works with the physical switches connected.
Now you can configure the settings and associate the Dry Contact Mini Module SW0901-F with smart home control apps.
Warning!
Any changes to the wiring should be made after making sure there is no voltage in the electrical system.
Install the device in a protected and dry place inside the house.
The installation of the device should be done carefully by a qualified electrician.
Do not connect devices that exceed the maximum load indicated to the device.
Use the device only with an electrical grid and with devices that comply with all applicable standards.
A short circuit in the power grid or in any device connected to the device may damage the product.
Connect the device only by the methods indicated. Any other method may cause damage and void the warranty.
Setup
Now that you have completed the physical installation of the Dry Contact Module Mini SW0901-F, you can go ahead with the setup.
Have you always dreamed of controlling all your smart home accessories from one app? The Freedompro Home app offers a complete and innovative smart home experience!
Follow the steps below to complete the setup process and proceed with pairing Freedompro Modules with your phone in no time.
Download the Freedompro Home app;
Accept the permissions required by the app and log in with your Freedompro account. If you do not have an account, you can create one through Apple, Facebook or Google;
Tap on the "+" in the upper right corner;
Follow the directions in the Freedompro Home app to associate the Module;
Tap on “Done" to complete the Module setup or "Add Module" if you need to pair multiple Modules;
The Module will be displayed on the home page of the app.
Freedompro Smart Modules are now ready to be used.
Freedompro devices work as soon as they are connected to the power supply. However, to make the best use of them, it is advisable to customize the type of controls that are connected to them.
Here you can customize the settings and change the behavior of the physical controls to suit your needs.
Controls can be configured through the Freedompro Home app.
Once you have installed and set up your Module you can proceed to pair it with smart platforms.
Pairing
Check out the article to complete the pairing with your favorite app:
Maintenance and Reset
Here is a summary for how best to troubleshoot the maintenance or reset of Freedompro Modules.
Status Led
Check the color of the status LED located on the front of the Freedompro Smart Module to immediately view and understand the status of the device.
Why is the status LED on my Freedompro Smart Module red? Why is it flashing? Find out in the blink of an eye!
Here is a list of the meanings of the status LED colors:
Solid blue: System ready
Flashing blue: Pairing mode
Flashing green: Identification
Steady magenta: No Internet connection
Flashing magenta: No Wi-Fi connection
Steady red: System starting up
Flashing red: Error
Fast flashing red: Factory reset
Reset
Problems with your Freedompro Module? Before you continue reading this guide, please contact our Customer Service Department. If resetting the Freedompro module is your only option, simply follow this guide to reset the device in a few moments.
In fact, as the word itself says, performing a reset on a Freedompro module means resetting the product and then restoring the factory settings.
Warning:
Reset is an irreversible operation. Once performed, it will not be possible to go back.
Are you sure you want to reset your Freedompro Module? Please follow the steps below:
Open the flush mount box in which the Freedompro module was installed;
Press and hold the "Setup" button on the back for about 10 seconds until the status LED starts flashing rapidly red;
Wait a few moments and you will be able to configure the Freedompro module again.