Freedompro Light Module DIN is a smart lighting control device for traditional electrical systems.
What is Freedompro Light Module DIN
As with all other Freedompro Modules, Light Module is a Wi-Fi-connected Matter-certified smart relay that works with the best smart home control mobile apps. Such as Apple HomeKit, Google Assistant, Amazon Alexa, IFTTT, and Home Assistant.
Freedompro Light Module provides 4 channels, allowing users to setup and control up to 4 light-type accessories at the same time.
Each channel features an energy metering function that allows you to monitor and manage the energy consumption of the accessories in real time.
Light Module evolves and enhances the lighting system, allowing smart home lights to be controlled by both voice commands and local or remote control via the Freedompro app or other smart apps.
In addition, it's possible to setup and take advantage of fully customizable automations and scenarios suitable for users' needs through the use of smart platforms.
Built to be ready to use, installing Freedompro Light Module takes only a handful of minutes and involves no invasive masonry work or changes to the electrical system.
Wiring Diagrams and Technical Specifications
Technical Specifications
Model | Light Module DIN | LB0104-A |
Dimensions | Height: 90 mm |
Internet connection | Wi-Fi 2.4 GHz IEEE 802.11b/g/n |
Maximum absorption (W) | < 2,5 W |
Power supply | 110-240 V AC 0,1 A |
Amperage (per channel) | 5 A |
Certifications | Matter |
Functions | Output timing |
Wiring diagrams
See the instruction manual and wiring diagrams for this Module by visiting this link.
Installation
Technical Requirements
Freedompro Light Module DIN LB0104-D
Apple/Android Smartphone
2.4 GHz WiFi network
Package Contents
Freedompro Light Module DIN LB0104-D
Quick Start Guide
HomeKit code sheet
How to Install Light Module DIN LB0104-D
Installing Freedompro Light Module DIN LB0104-D is really very simple, just follow these steps:
Before installing your Freedompro module, disconnect power from the electrical system;
Clip the Freedompro module to the DIN rail of the electrical panel, inside a junction box, or wherever you prefer;
Connect accessory and control cables to the top and bottom connectors as shown in the connection diagrams;
You can find them in the manual included in the package or on top of this article;Connect the power supply as shown in the wiring diagrams;
Verify correct wiring and reconnect power to electrical system;
Status led of the Freedompro module will turn fixed magenta.
After connecting the device and powering it up, the device is immediately working with the switches connected to it at the bottom.
Now you can set up its settings and pair Freedompro Light Module DIN LB0104-D with smart platforms.
Warning!
Any changes in wiring should be made after making sure there is no voltage in the electrical system.
Install the device in a protected, dry place inside the house.
Device installation should be done carefully by a qualified electrician.
Do not connect devices that exceed the maximum indicated load to the device.
Use the device only with an electrical grid and with appliances that comply with all applicable standards. A short circuit in the power grid or in any appliance connected to the device may damage the product.
Connect the device using only the indicated methods. Any other way may cause damage and void the warranty.
Setup
Now that you completed the physical installation of the Light Module DIN LB0104-D, you can go on with the setup step.
Have you always dreamed of controlling all the accessories in your smart home from one app? The app Freedompro gives you a complete and innovative smart home experience!
Follow the steps below to complete the setup process and go on pairing the Freedompro Modules with your smartphone in no time.
Download the app Freedompro;
Accept permissions requested by the application and log in with your Freedompro account. If you do not have an account you can create one through Apple, Facebook or Google;
Click on the "+" in the upper right corner;
Follow the directions on the app Freedompro to pair the module;
Click "Finish" to complete the module configuration or "Add a new module" if you have to pair more modules;
The module will be shown on the home page of the application.
Your Freedompro Smart Modules are now ready to use.
Freedompro devices are usable as soon as they are connected to the power supply. However, to use them best, it is recommended to customize the type of controls that are connected to them.
Here you can customize the settings and change the physical control behavior to suit your needs.
The controls can be configured through the Freedompro app. If a WiFi network is not available, you can complete the configuration process using the WebApp.
Once you have installed and configured your module you can proceed to pair it with the smart platforms.
Pairing
Complete the pairing process with your favorite app:
Maintenance and Reset
Here is a summary for better solving maintenance problems or resetting Freedompro Modules.
Status Led
Check the color of the status LED located on the front of your Freedompro Smart Module to immediately view and understand the status of the device.
Why is the status LED on my Freedompro Smart Module red? Why is it flashing? Find it out in the blink of an eye!
Here is a list of the meanings of the status LED colors:
Solid blue: System ready
Flashing blue: Pairing mode
Flashing green: Identification
Steady magenta: No Internet connection
Flashing magenta: No Wi-Fi connection
Steady red: System starting up
Flashing red: Error
Fast flashing red: Factory reset
Reset
Problems with your Freedompro Module? Before you continue reading this guide, please contact our Customer Service Department. If resetting the Freedompro module is your only option, simply follow this guide to reset the device in a few moments.
In fact, as the word itself says, performing a reset on a Freedompro module means resetting the product and then restoring the factory settings.
Warning:
Reset is an irreversible operation. Once performed, it will not be possible to go back.
Are you sure you want to reset your Freedompro Module? Please follow the steps below:
Open the flush mount box in which the Freedompro module was installed;
Press and hold the "Setup" button on the back for about 10 seconds until the status LED starts flashing rapidly red;
Wait a few moments and you will be able to configure the Freedompro module again.