Status LED

Status LED

This guide helps you correctly interpret the meaning of the status LED colors on the Freedompro module.

Each color and type of flash indicates a different phase of operation or a specific problem.

In short: The procedure is a quick visual guide to using, configuring, or troubleshooting the module.

🔵 Solid blue
The module is ready and already associated with the app.
If this is your first setup or you have just performed a reset, remember to complete the setup via the Freedompro Home app.

🔵 Flashing blue
The module is in pairing mode and is ready to be paired with the app.

🟣 Flashing Magenta
The module is not connected to Wi-Fi.
Check that your router or Access Point is up and running. If the problem persists, restart your router and perform a reset by following the procedure​.

🟣 Fixed Magenta
The module cannot connect to the Internet.
Check that there is network coverage and try restarting the router and Access Point.

🟡 Flashing yellow
The form has already been associated via Matter.
You are going through the process of pairing the module to another app with the Matter code. Once complete, the LED will turn solid blue after about 15 minutes.

🟢 Flashing green
The module is reporting its position (identification function).
It appears for about 5 seconds after pressing “Identify Module” in settings.

🔴 Steady red
The module is starting.
Check the connections and, if necessary, reset by following the procedure .