Skip to main content
Skip table of contents

Light Module 4C 5 A | LB0104

What is the Freedompro Light Module 4C 5 A?

Freedompro Light Module 4C 5 A is a device component for smart control of lights in traditional

electrical systems.

As with all the other modules of the Freedompro home ecosystem, Light Module is a Wi-Fi connected smart relay certified by the best smart platforms for smart home control: Apple HomeKit, Google Assistant, Amazon Alexa, IFTTT, and Home Assistant.

Freedompro Light Module has 4 channels, allowing users to configure and control up to 4 light-type accessories at the same time, calculating their energy consumption in real time.

Light Module evolves and enhances the lighting system, enabling control of smart home lights with both voice commands and local or remote control via the Freedompro app or other smart apps.

In addition, through the use of smart platforms, fully customizable automations and scenarios can be configured and leveraged, adaptable to users' needs.

Built to be ready to use, installing Freedompro Light Module takes only a couple of minutes and requires no invasive masonry work or modifications to the electrical system.

Wiring Diagrams and Technical Specifications

Wiring diagrams

Here is the wiring diagram:

Technical Specifications (110-240 V AC)


Height: 90 mm
Width: 36 mm
Depth: 32 mm
(2 DIN modules)

Internet connection

Wi-Fi 2.4 GHz IEEE 802.11b/g/n

Maximum absorption (W)

0,2 W

Power supply

110-240 V AC 0,1 A


Apple HomeKit
Google Assistant
Amazon Alexa
Home Assistant


Output timing
Power monitoring
Automation and scenes


Technical Requirements

  • Freedompro Light Module 4C 5 A

  • Apple/Android Smartphone

  • 2.4 GHz WiFi network

Package Contents

  • Freedompro Light Module 4C 5 A

  • Quick Start Guide

  • HomeKit code sheet

How to install Light Module 4C 5 A

Installing Freedompro Light Module 4C 5 A is really very simple, just follow these steps:

  1. Before installing your Freedompro module, disconnect power from the electrical system;

  2. Clip the Freedompro module to the DIN rail of the electrical panel, inside a junction box, or wherever you prefer;

  3. Connect accessory and control cables to the top and bottom connectors as shown in the connection diagrams;
    You can find them in the manual included in the package or on top of this article;

  4. Connect the power supply as shown in the wiring diagrams;

  5. Verify correct wiring and reconnect power to electrical system;

  6. Status led of the Freedompro module will turn fixed magenta.

After connecting the device and powering it up, the device is immediately working with the switches connected to it at the bottom.

Now you can set up its settings and pair Freedompro Light Module 4C 5 A with smart platforms.

Set up the module with the Freedompro app in the next step


  • Any changes in wiring should be made after making sure there is no voltage in the electrical system.

  • Install the device in a protected, dry place inside the house.

  • Device installation should be done carefully by a qualified electrician.

  • Do not connect devices that exceed the maximum indicated load to the device.

  • Use the device only with an electrical grid and with appliances that comply with all applicable standards. A short circuit in the power grid or in any appliance connected to the device may damage the product.

  • Connect the device using only the indicated methods. Any other way may cause damage and void the warranty.


Now that you completed the physical installation of the Light Module 4C 5 A, you can go on with the setup step.

Have you always dreamed of controlling all the accessories in your smart home from one app? The app Freedompro gives you a complete and innovative smart home experience!

Follow the steps below to complete the setup process and go on pairing the Freedompro Modules with your smartphone in no time.

  • Download the app Freedompro;

  • Accept permissions requested by the application and log in with your Freedompro account. If you do not have an account you can create one through Apple, Facebook or Google;

  • Click on the "+" in the upper right corner;

  • Follow the directions on the app Freedompro to pair the module;

  • Click "Finish" to complete the module configuration or "Add a new module" if you have to pair more modules;

  • The module will be shown on the home page of the application.

Your Freedompro Smart Modules are now ready to use.

Freedompro devices are usable as soon as they are connected to the power supply. However, to use them best, it is recommended to customize the type of controls that are connected to them.

Here you can customize the settings and change the physical control behavior to suit your needs.

Click here to customize the type of commands

The controls can be configured through the Freedompro app. If a WiFi network is not available, you can complete the configuration process using the WebApp.

Once you have installed and configured your module you can proceed to pair it with the smart platforms.


Maintenance and Reset

Here is a summary for better solving maintenance problems or resetting Freedompro Modules.

Status Led

Check the color of the status LED located on the front of your Freedompro Smart Module to immediately view and understand the status of the device.

Why is the status LED on my Freedompro Smart Module red? Why is it flashing? Find it out in the blink of an eye!

Here’s a list of status LED colors' meanings:

Fixed blue: System ready

Flashing blue: Pairing mode

Flashing green: Identify

Fixed magenta: No Wi-Fi connection 

Flashing magenta: No internet connection 

Fixed red: System boot

Flashing red: Error

Fast flashing red: Factory reset 


Are you facing issues with your Freedompro module? Before you continue reading this guide, contact our Customer Service Department. If your only option is to reset your Freedompro module, follow this guide and you will reset your device in a matter of moments.

In fact, as the word itself says, performing a reset on a Freedompro module means resetting the product and thus restoring the factory settings.

The reset operation is irreversible, so once done, you cannot go back.

Are you sure you want to reset your Freedompro module? Well, please follow the steps below:

  1. Open the electrical panel or junction box where you have installed your Freedompro module;

  2. Using a sharp tool, press and hold the "Setup" button on the front panel just below the status LED for about 10 seconds, until the status LED begins to flash rapidly red;

  3. Wait a few moments and you will be able to set up your Freedompro module again.

JavaScript errors detected

Please note, these errors can depend on your browser setup.

If this problem persists, please contact our support.