Easykon for KNX | Maintenance and Reset
Here is a summary for better solving maintenance problems or resetting Easykon for KNX.
Technical Specifications
Dimensions | Height: 90 mm |
Internet connection | Ethernet Cable |
Power supply | 12/24 V AC/DC 0.1 A |
Certifications | Apple HomeKit |
Status Led
Check the color of the status LED located on the front of your Easykon for KNX to immediately view and understand the status of the device.
Why is the status LED on my Freedompro Smart Module red? Why is it flashing? Find it out in the blink of an eye!
Here’s a list of status LED colors' meanings:
Fixed blue: System is up and running
Flashing blue: System is being reset or unpaired
Flashing green: Identify
Fixed magenta: No connection with the KNX BUS
Flashing magenta: No internet connection
Fixed red: System initialising
Flashing red: Ethernet cable disconnected
Settings
In the settings you can:
Backup and restore the setup
Change the language of the panel
See all product information
Create the access code
Change Easykon KNX physical address
Log out
To access settings:
Log in to the web interface
Click on the wheel icon in the top right-hand corner
To return to the configuration panel, press the X in the upper right corner.
Backup
Making a backup is simple. Perform the back up to create a copy of the configurations of all the accessories so you can restore your work at any time.
The backup does not contain:
Imported KNX project
Users or private settings
To backup:
Log in to the web interface
Enter settings (gear wheel icon)
Select "Backup and restore" from the top menu
Click on the "Backup" button
Save the file to your computer
Restore
The restore function returns the accessories and their parameters to the state they were in when the backup was performed.
Attention: Restore is an irreversible operation. All existing accessories will be replaced by those restored.
Requirements:
Have a compatible backup file
To restore:
Log in to the web interface
Enter settings (gear wheel icon)
Select "Backup and restore" at the top
Click on "Choose an .easykon file" and select the file from your computer
Click on "Restore"
You can restore a backup using an .easykon file created with a firmware version equal to or greater than the one in use.
Change the interface language
To change the interface language:
Log in to the web interface
Enter settings (gear wheel icon)
Select "Language" in the top menu
Select the flag of the desired language
This operation does not affect the language chosen in the applications and voice assistants paired with Easykon for KNX.
Device information
In this section you will find all the information on the product.
To view this information:
Log in to the web interface
Enter settings (gear wheel icon)
Select "Device Information" in the top menu
Access code
The access code allows you to access to Easykon for KNX interface without pushing the button on the front side of the product.
Using the access code is very useful if Easykon for KNX is installed in a place that you cannot reach easily.
To create the access code:
Access to the web interface
Enter settings (gear wheel icon)
Select "Access code" in the top menu
Click on "Create access code"
The access code will be visible just once, then it will be hidden for safety reasons. We encourage you to save it right away after creating it.
If you don't remember the access code, to enter in the interface you have to push the "Sign in / Unpairing" button. From inside the interface you will be able to create a new code anytime.
KNX physical address
The KNX physical address allows to identify in an unique way a device installed on the KNX bus.
As default, Easykon for KNX takes the address 15.15.250 in every system in which it is installed.
To change Easykon KNX physical address:
Log in to the web interface
Enter settings (gear wheel icon)
Select "KNX physical address" in the top menu
Change the address
Click on "Save" to complete the operation
The accepted values are:
0 - 15 / 0 - 15 / 0 - 255
Change Easykon KNX physical address can be useful if the address 15.15.250 is already taken in the system where you are installing the bridge.
Logout
The logout function allows you to safely disconnect from the interface.
To log out:
Log in to the web interface
Enter settings (gear wheel icon)
Select "Logout" in the top menu
Press the "Logout" button
Reset
Resetting Easykon for KNX serves to eliminate all previous configurations, users and preferences and return the product to factory settings.
Note: Reset is an irreversible operation.
So, are you sure to reset Easykon for KNX? Well, follow this guide, it' very simple!
Press and hold the "Reset" button on the front with the help of a paperclip until the status light starts flashing blue
